| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Surface Treatment: | Baking Paint |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Description |
| Product Name | Steering Axle Forklift |
| P/N | 43357802-44451 |
| Applied Model | Komatsu16 Forklift 3T |
| Net Weight (kg) | 89 |
| Gross Weight (kg) | 96 |
| Qty per Carton | 1 |
| Carton Size (cm) | 110*80*35 |
Forklift Steering Axle
When assembling and adjusting a forklift steering axle, the following points should be noted:
1. Proper Connection and Clearance:
After assembling the steering axle, ensure all parts have the correct connection and clearance.
2 . Steering Knuckle Shaft and Needle Bearing Clearance:
The maximum clearance should not exceed 0.1mm.
3. Steering Knuckle and Kingpin Clearance:
The clearance should not exceed 0.1mm.
4. End Play Between Steering Knuckle and Axle:
The typical end play is 0.05-0.1mm. If the end play is too large, add shims to adjust.
5. Adjusting the Steering Angle:
Raise the steering axle, turn the hub to the leftmost position, adjust the steering cylinder piston rod, then install the spring washer and tighten the nut.
6. Lubricating and Adjusting the Hub Bearings:
Apply grease to the hub bearings and install them. Tighten the hub bearing adjustment nut. If the wheel is difficult to turn, back off the nut by 1/5 of a turn and install the lock washer. The wheel should turn smoothly without feeling any axial play when rocked.
7. Adjusting Hub Parallelism:
The error should not exceed 1mm. Adjust the steering rod screws as needed and tighten the lock nuts after adjustment.
){kind=link}