Product Title: Cylinder Head Gasket
Product Model: C240F5-11141-069-0
Detailed Photos
Product Parameters
| Item |
Description |
| Product Name |
Cylinder Head Gasket |
| P/N |
C240F5-11141-069-0 |
| Applied Model |
C240PKG / J |
| Net Weight (kg) |
0.50 |
| Gross Weight (kg) |
1.50 |
| Qty per Carton |
1 |
| Carton Size (kg) |
47*21*03 |
Here are other forklift engine parts below for your choice:
Product Description
Forklift Diesel Engine Cylinder Head Gasket Product Description:
It is applied to the C240 diesel engine and adopts metal steel surface technology, and the cutting surface is neat and flawless. Forklift engine cylinder head gasket has the advantages of heat resistance, corrosion resistance, sufficient strength, certain elasticity, and thermal conductivity.
Forklift Engine Cylinder Gasket Disassembly and Maintenance Caution:
- Removing the cylinder head bolts and replacing the cylinder pads must be performed after the engine has completely cooled down to prevent the cylinder head from flexing and deforming.
- Check the surface of the cylinder head gasket for depressions, protrusions, damage, etc .; check whether the flatness of the cylinder head and cylinder body meets the requirements, and then clean the cylinder gasket, cylinder head, and cylinder body, and blow dry with high-pressure air to avoid the influence of dirt seal.
- The selected cylinder gasket must be a genuine quality accessory that meets the requirements (specifications and models). Pay attention to the up and down orientation marks to prevent reverse installation and avoid human failure. Please contact the leading forklift parts for original accessories.
- Tighten the cylinder head bolts in accordance with the technical specifications. Since the center is symmetrically extended to the two ends and crosswise, it is tightened to the specified torque 2 to 4 times; it is more reliable to fasten it once in the hot car state.
- Should engine cylinder head bolts not be removed by rusting, you do not pry hard with iron to avoid damaging the cylinder head. You can inject kerosene into the screw holes of the cylinder head for a while to remove it.
- If the cylinder head is improperly stored, disassembled or disassembled, and the cylinder gasket is damaged or deformed, the cleaning during installation will result in poor work and tight sealing, which may cause human failure and must be taken seriously.
Our Advantages
Anhui Leading Forklift Parts Co., Ltd. is owned by SA Group which is the biggest forklift parts supplier in China in the last three years. We have 31 branch companies in China and a large center warehouse in Hefei City. Usually, we have 85000 items in stock.
Our headquarters is in Hefei City Anhui Province which is the most famous forklift trucks and parts production base in China. Nearly ten forklift truck manufacturers in Hefei City including Heli, JAC, TCM, TEU, HECHA, Vmax, MIMA, and Cherry forklifts. With more than 300 forklift parts manufacturers here, we are basically producing all necessary parts and components of internal combustion forklifts and electric forklifts.
We have been focusing on forklift parts since 1998. The strength of our company is that we supply the full range of parts for Heli forklifts, a wide variety of parts for JAC, and Lonking forklifts, a full range of parts for China engine assy and parts, such as Xichai, Quanchai, FAW, YTO engine assy and parts, transmission assy and parts, driving steering axle assy and parts, forklift brake parts, forklift hydraulic parts, forklift bearing which are widely used for China brand forklifts.
If your demand is to our advantage, we will give you more options and better prices!
){kind=link}