| Customization: | Available |
|---|---|
| Material: | Aluminum Alloy |
| Surface Treatment: | Baking Paint |
|
Still deciding? Get samples of US$ 6.32/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Part Number | Application |
| 30CJA53-40000 | Hyundai Forklift 2-3T |
| 239A5-40101 | ATFFG20-30C6/T6 Forklift |
| 281E5-42101 | Nichiyu / TCM / ATF Forklift Trucks |
| 92512651G | Tailift Forklift Truck 1-3.5T |
| Q64G3-70221 | Reach Truck Forklift 1-2T |
| ZDZB-TLF4.5 | Tailift Forklift 4.5T |
Step-by-Step Guide to Bleed a Forklift Brake System
1. Park the Forklift on a Level Surface: Ensure the parking brake is engaged.
2. Locate the Bleed Screws: These are typically located at the highest point of each brake caliper.
3. Fill the Master Cylinder: Add fresh brake fluid to the master cylinder, keeping it topped up throughout the bleeding process.
4. Open the Bleed Screw: Have your helper slowly pump the brake pedal several times and then hold it down. Quickly open the bleed screw on one of the calipers.
5. Collect the Fluid: As you open the bleed screw, brake fluid containing air bubbles will flow out. Collect this fluid in a clean container.
6. Tighten the Bleed Screw: Once a steady stream of clean fluid emerges, quickly tighten the bleed screw.
7. Repeat the Process: Repeat steps 4, 5, and 6 for each wheel, following the recommended sequence (usually starting with the farthest wheel from the master cylinder).
8. Check Fluid Level: After bleeding all the brakes, check the fluid level in the master cylinder and top it up if necessary.
){kind=link}