Factory Outlet High Quality Lift Truck Steer Knuckle for Tailift Forklift 3t

• Material: Stainless Steel
• Surface Treatment: Oxygenation
• Customized: Non-Customized
• Standard: Standard
• Manufacturer: Genuine Forklift Parts Maker
• Feature: Cost-Effective OEM Forklift Parts
• Model NO.: TLF-42504218-X-DD
• Advantage: High Quality Forklift Parts
• Keywords: Steer Knuckle
• Transport Package: Inside PVC Bag, Outside Carton
• Specification: 14*10*20 cm
• Trademark: Leading Forklift Parts
• Origin: China
• HS Code: 8431209000
• Production Capacity: 5000 PCS / Mounth

Product Description

Product Title: Lift truck steer knuckle
Product Model: TLF-42504217-X-DD Lift truck steer knuckle


 

Item	Description
Product Name	Lift truck steer knuckle
P/N	TLF-42504218-X-DD
Applied Model	left and right(Overall forging)
Net Weight (kg)	4.4
Gross Weight (kg)	4.7
Qty per Carton	1
Carton Size (cm)	14*10*20

Lift Truck Steer Knuckle

The function of lift truck steer knuckle is to transmit and bear the front load of the forklift, support and drive the front wheel to rotate around the king pin, so that the forklift is steered, and it is subject to variable impact loads when the forklift is running, so it is required to have a high strength.

Lift Truck Steer Knuckle Should Be Inspected When Maintenance

1. Inspection of knuckle journal locking threads. No more than 2 teeth were injured. The lock nut can only be screwed in with a wrench. If it can be screwed in by hand, it means that the middle diameter of the thread is worn and loose, and the steering knuckle should be repaired or replaced.

2. Inspection of taper holes on knuckles. The wear of the taper hole matched with the knuckle arm and other rods should be checked with a plug gauge.The contact area should not be less than 70%, and the thrust end face of the taper neck matched with the taper hole should not be less than 2mm. Otherwise, replace the knuckle.